Flexible Clamp Mount for Action Cameras: 35.5cm Arm Guide

Flexible Clamp Mount for Action Cameras: 35.5cm Arm Guide

Some shots can't be filmed from a standard mount. You want the camera over your workbench, above a cooking pan, or beside a bike frame. There's no flat spot, no tripod, and your hands are busy.

A flexible clamp mount solves that. You grab onto a pipe, a table edge, or a light stand, then bend the arm until the angle looks right. This guide covers how the HSU Flexible Clamp Mount with 35.5cm Long Arm works and where it helps most.

What Is a Flexible Clamp Mount?

It's a clamp on one end, a bendable gooseneck arm in the middle, and a camera mount on the other end. You clip it on, shape the arm, and shoot.

Unlike a tripod, it doesn't need a flat surface. Unlike a fixed bracket, it doesn't lock you into one angle. You get a camera position you can change in seconds.

That makes it a handy tool for:

  • Overhead and top-down shots
  • Tutorials and how-to videos
  • Time-lapses of projects
  • Vlogs, streams, and desk setups
  • Filming from awkward spots

Meet the HSU Flexible Clamp Mount with 35.5cm Long Arm

This mount pairs a sturdy clamp with a long, bendable arm. Two ball heads give you extra control over where the camera points.

Key Features

  • Long, flexible arm: the gooseneck extends up to 13.98 inches (35.5cm)
  • Double 360° ball head: adjust the angle in almost any direction
  • Universal 1/4"-20 screw: fits compact cameras, webcams, and GoPro cameras
  • Wide clamp opening: opens up to 1.8 inches (4.6cm), so it can grip light stands, tripod legs, pipes, boards, and similar surfaces
  • Simple setup: clamp on, bend, tighten, and film

The package includes one flexible clamp mount. Cameras and other accessories are sold separately.

Why the Long Arm Matters

A short arm keeps your camera close to the clamp. That limits what you can frame.

At 35.5cm, this arm lets you reach out over a table, hold the camera above your hands, or move it away from a wall. You get more room to find the right angle without moving the whole setup.

How to Set It Up

Setup is quick.

  1. Open the clamp and attach it to your surface. Check that it grips firmly.
  2. Screw your camera or camera adapter onto the 1/4"-20 thread.
  3. Bend the gooseneck to roughly where you want the camera.
  4. Fine-tune the angle with the two ball heads, then tighten them.
  5. Record a short test clip and adjust if needed.

A small tip: keep the load light. Gooseneck arms work best with compact cameras. A heavy rig can cause the arm to sag over time, so choose a lighter camera setup for a steadier shot.

Where It Works Best

Content Creators and Vloggers

Film from above your desk, kitchen counter, or craft table. The long arm keeps the camera out of your way while capturing what your hands are doing.

Hobbyists and DIY Fans

Woodworking, painting, repairs, and model building all look better from overhead. Clamp the camera to your table and keep your hands free.

Outdoor and Travel Use

Clip it to a railing, a tent pole, or a pipe to get a different angle on the scene. It also works with a light stand for stationary shots.

Beginners

Not sure what mount to buy first? A clamp with a flexible arm is a good starter piece. You can use it in many ways without needing extra parts.

Tips for Steadier Footage

  • Clamp to something solid. A wobbly surface means a wobbly shot.
  • Keep the arm short when you can. Less extension means less movement.
  • Tighten both ball heads after you set the angle.
  • Avoid wind and vibration where possible, or extend the arm only as far as you need.
  • Check the grip before a long recording session.

Common Questions

Does it fit a GoPro? Yes. It uses a standard 1/4"-20 screw, which works with GoPro cameras, webcams, and many compact cameras. Some GoPro models may need a simple tripod adapter. The FAQs page covers common compatibility questions.

How wide can the clamp open? Up to 1.8 inches (4.6cm).

Can I clamp it to a tripod or light stand? Yes. It's built to attach to tripods, light stands, pipes, boards, and similar surfaces.

Is it good for heavy cameras? It's designed for compact cameras and action cameras. For heavier gear, a stronger support is a better choice.

Final Thoughts

A good flexible clamp mount opens up angles a tripod can't reach. With a 35.5cm bendable arm, two 360° ball heads, and a clamp that grips most surfaces, the HSU Flexible Clamp Mount gives you plenty of room to frame the shot you want.

Want more mounting ideas and setup tips? Read the latest posts on the HSU blog. And if you're planning an order, the Shipping Policy page lists delivery details for your region.

RELATED ARTICLES

Leave a comment

Your email address will not be published. Required fields are marked *